Farnborough Low Gates:
Manufactured by hand in the UK by skilled craftsmen using the finest materials to provide ultimate durability and quality. All of our gates come complete with a 10 year workmanship guarantee, adjustable hinges, latch, 2 x drop bolts. We use a 25mm x 25mm frame for the sides and the bottom, 25mm x 10mm flat top bar and 12mm round bars. Standard finish is black powder coated which leaves a nice smooth shine.
Height of Gate: Taken to the highest point of each gate. We recommend allowing a 50mm (2") clearance between the bottom edge of gate and driveway (as long as the drive is level). If you require a more exact height, please contact us to order.Gate Furniture Included (hinges etc): 4 x adjustable hinges, hinge pins, latch and drop bolts included with each gate. As standard, the position of the hinge will be 6" (150mm) from the bottom edge of gate and 6" (150mm) from top edge of gate. If you require these to be different (if for example you already have pins set into a post/ pillar), please call us.
How to Measure Gate Width:
Working out the required size is an important yet simple task to complete but we are always at hand to assist you through the process (0800 6124 965)
Calculating Driveway Gate width between existing Pillars or Posts:
Take three measurements, top, middle and bottom (as below).
Take the shortest of the three measurements and reduce by 150mm (or 6"). This allows for the hinge (inc pins) and centre opening gap. The final figure will be the actual width of gate required.
For example: Top: 3m 455mm | Middle: 3m 450mm | Bottom: 3m 445mm - shortest measurement would be 3m 445mm - reduce by 150mm = Actual Gate Width of: 3m 295mm
|Hanging Style||25mm x 10mm (or over 10ft) 25mm x 25mm|
|Bottom Rail||25mm x 10mm (or over 10ft) 25mm x 25mm|
|Top and Middle Rail||25mm x 10mm (or over 10ft) 25mm x 25mm|
|Closing Rail||25mm x 10mm|
|Main Infill Bars||12mm|
|Handcrafted in the UK||Bespoke, any width or height|
|Guarantee||10 year against gate welds|
|Opening||Electric or manual|