Bi Fold Gates, The Brentwood

The Brentwood Bi Fold Gate is a popular style of gate. Flat head and horns with vertical cladding. An original designed gate with traditional mortise and tenon joints.Being a bi fold in design makes it a great gate for those where the opening space is limited or driveway slopes up. The gates are able to fold back on themselves so only needs a quarter of the width of the gates in its open position.
£519.00
£429.00
£90.00 saving (Sale...Limited time only)
Choose your options
Need advice? Give us a call
0800 6124 965 / 0330 6600 107

Bi Fold Gates, The Brentwood

The Brentwood Bi Fold Gate is a popular style of gate. Flat head and horns with vertical cladding. An original designed gate with traditional mortise and tenon joints.
Being a bi fold in design makes it a great gate for those where the opening space is limited or driveway slopes up. The gates are able to fold back on themselves so only needs a quarter of the width of the gates in its open position.

Working out the required gate size:

To work out the size of the gates take the opening width you have (between pillars/posts) and deduct the following to allow for hinges. This is assuming the gates are to be opening inwards.

3 x leafs minus 60mm from opening size
4 x leafs minus 80mm from opening size
5 x leafs minus 100mm from opening size
6 x leafs minus 120mm from opening size
7 x leafs minus 140mm from opening size
8 x leafs minus 160mm from opening size

The above measurements allow 15mm clearance between the edge of gate and post/pillars, 20mm between 2 leafs attached with a strap hinge and 10mm for the clearance in the middle of the gates (where the two gates close in the middle)
For more information or advice with working out your measurements call us free on 0800 612 4965 and we will be happy to help.

Fitting the hinges on these gates are straight forward. We recommend either the 24" or 36" adjustable hinge set for the outer leaf gates. This hinge is able to hold a great deal of weight and then use strap hinges for the other leafs. A jockey wheel is advisable if the gates are very large or to make the opening of the gates easier.

All gates online can be purchased to the nearest inch, if you do require a more precise size, please contact us. (Unlike others - there is NO additional cost for bespoke, we simply base price on the next size!)
Optional Extras:

Finish: Professionally applied. Choice of colours available to compliment your home. Need another colour? We can finish your gate in any RAL colour. See here for colour chart.

Stain options for wooden bi-fold gates.

Gate Posts:

Sold in pairs (or individually over the phone). We recommend any gates over 10ft wide (5ft per leaf) to have 6" x 6" posts. All wooden posts are deep treated for "in the ground" protection. As such, they will not match the timber on the gate. They can be stained/ painted to suit.

Gate Hinges:

Available in either galvanised or galvanised and black finish. Heavy duty adjustable gate hinge set which includes hinges, drop bolts, brenton bolt, latch and fixings (for gate only). 

Adjustable gate hinges for bi-fold gates.


Please note: Images are used to show the style of gate and have been computer generated. A Sample of wood used in construction is available on request. Width advertised is total width of gate. For example, if you select a width of 9ft, you will receive 2 leafs at 4ft 6". Height is taken to the highest point of gate. Rear view design can differ from image shown depending on the width of gate and/ or height.

« Back
Timber Slow grown, Redwood Pine
Frame 3" x 3" (70mm x 70mm)
Cladding T, G & V - 19mm deep x 125mm (nominal)
Rear Bracing 3" x 2" (70mm x 47mm)
Manufactured Handcrafted in the UK
Construction Traditional, time served techniques
Sizes Made to measure - width and height