Cheltenham Side Gate from

Read product reviews (2)
Cheltenham Side Gate - ideal security gate:Deep Premium framed - Handcrafted in the UK by skilled craftsmen using the finest materials to provide ultimate durability and quality. Unlike our competitors, our gate material is thicker, comes complete with a 10 year workmanship guarantee, adjustable hinges/ pins. Therefore, if fitting to existing posts/ pillars - this gate is ready to hang with no extras required.
£199.00
£174.00
£25.00 saving (Sale...Limited time only)
Choose your options
Need advice? Give us a call
0800 6124 965 / 0330 6600 107

Cheltenham Side Gate - ideal security gate:

Select your "Made to Measure" sizes from above or choose from our "In Stock" sizes below:
 


Deep Premium framed - Handcrafted in the UK by skilled craftsmen using the finest materials to provide ultimate durability and quality. Unlike our competitors, our gate material is thicker, comes complete with a 10 year workmanship guarantee, adjustable hinges/ pins. Therefore, if fitting to existing posts/ pillars - this gate is ready to hang with no extras required.

Some of our metal gates during production.

Width of Gate: Taken as the actual gate (not opening size). This can be easily calculated - measure the distance between the pillars and reduce by 100mm (4").
 

Height of Gate: Taken to the highest point of each gate. We recommend allowing a 50mm (2") clearance between the bottom edge of gate and driveway (as long as the drive is level). If you require a more exact height, please contact us to order.

Gate Furniture (hinges etc): 2 x adjustable hinges, hinge pins, closing receiver and opening latch included with each gate (enough to hang direct on existing posts/ pillars). As standard, the position of the hinge will be 6" (150mm) from the bottom edge of gate and 6" (150mm) from top edge of gate. If you require these to be different (if for example you already have pins set into a post/ pillar), please call us.

Metal Gate Posts: 2" x 2" (50mm x 50mm). Supplied to allow the posts to sit in the ground to a recommended depth of 2ft or above ground posts designed to be mounted against an existing pillar or wall.

Size of Gate not listed? No problem, call us with your exact size.

Why choose us

Hand crafted gates individually made here in the UK

Can be made to ANY width and height

We construct gates to a very high standard, using the correct size metal for each gate depending on the style and size. This gives you a very strong gate which will last for many years

Adjustable hinges and opening latch are included with your gate

10 Year workmanship guarantee against welds

One of UK's largest gate manufacturers

Delivered straight to your door

  • Working out the required size is an important yet simple task to complete but we are always at hand to assist you through the process (0800 6124 965)

    Calculating Side Gate width between existing Pillars or Posts:

    Take three measurements, top, middle and bottom (as below).

    How to measure gap for garden gate

    Take the shortest of the three measurements and reduce by 100mm (or 4"). This allows for the hinge (inc pins) and opening gap. The final figure will be the actual width of gate required.

    For example: Top: 1m 155mm | Middle: 1m 150mm | Bottom: 1m 145mm - shortest measurement would be 1m 145mm - reduce by 100mm = Actual Gate Width of: 1m 045mm

    Download PDF Measurement Guide




Specifications:

 
Hanging Style/ Closing40mm x 40mm
Bottom Rail40mm x 40mm
Top and Middle Rail40mm x 10mm
Main Infill Bars16mm Diameter
Scrolls12mm x 6mm
Hanging Style 40mm x 40mm
Bottom Rail 40mm x 40mm
Top and Middle Rail 40mm x 10mm
Main Infill Bars 16mm
Handcrafted in the UK Bespoke, any width or height
Guarantee 10 year against gate welds
Calculating the actual width required of a wooden driveway gate is easy...just follow these simple steps below.
  1. Take three measurements between existing pillars or posts.
  2. Reduce the LOWEST size by 40mm (or approx 1.5")
  3. That's it! The size left after the reduction is the gate width required. Online, we offer gate width's to the nearest inch, simply select the closest size (lower) from the drop down menu - or call to order for an exact width.
How to measure driveway gate width

Please note: If no pillars or posts on there, measure the opening and reduce by 2 x posts. Gates up to 10ft wide should use 100mm x 100mm (4" x 4") posts, over 10ft use 150mm x 150mm (6" x 6") posts.

How to measure wooden driveway gates 
 Download and print PDF Guide on "How to Measure your Gate Width".
 


Measuring for Automated Gates:

For above ground automation, rear hung on the back of the posts take the smallest measurement and reduce by 50mm (this will give you the actual gate size to order).

For above ground automation, hung in the centre of the posts take the smallest measurement and reduce by 150mm (this will give you the actual gate size to order).

For below ground automation, rear hung on the back of the posts take the smallest measurement and plus 20mm (this will give you the actual gate size to order).

For below ground automation, rear hung in the centre of the posts take the smallest measurement and reduce by 240mm (this will give you the actual gate size to order).

Please note: Images are used to show the style of gate and have been computer generated. A Sample of wood used in construction is available on request. Width advertised is total width of gate. For example, if you select a width of 9ft, you will receive 2 leafs at 4ft 6". Height is taken to the highest point of gate. Rear view design can differ from image shown depending on the width of gate and/ or height.

Customer reviews
5 stars based on 2 reviews
Write a review
Jon Cash
from Whyteleafe
"

Great Gates!

Great service, great product!

Arrived on time, would highly recommend.

"
Neville Merritt
from Bordon
"

Great quality and value

This is my third gate bought from Gates and Fences. All have been well made, strong, secure and delivered on time. Highly recommended.

"