Free Composite Samples

To really appreciate this product we offer a free sample set (including free postage). That way you are able to see the thickness and strength of this product and which finish you would prefer before you make a purchase. To order, simply go through the checkout process as normal - no card details will be required we just need your address details.
£0.00
Need advice? Give us a call
0800 6124 965 / 0330 6600 107
To really appreciate this product we offer a free sample set (including free postage). That way you are able to see the thickness and strength  of this product and which finish you would prefer before you make a purchase. 

To order, simply go through the checkout process as normal - no card details will be required we just need your address details.

Composite cladding benefits
Calculating the actual width required of a wooden driveway gate is easy...just follow these simple steps below.
  1. Take three measurements between existing pillars or posts.
  2. Reduce the LOWEST size by 40mm (or approx 1.5")
  3. That's it! The size left after the reduction is the gate width required. Online, we offer gate width's to the nearest inch, simply select the closest size (lower) from the drop down menu - or call to order for an exact width.
How to measure driveway gate width

Please note: If no pillars or posts on there, measure the opening and reduce by 2 x posts. Gates up to 10ft wide should use 100mm x 100mm (4" x 4") posts, over 10ft use 150mm x 150mm (6" x 6") posts.

How to measure wooden driveway gates 
 Download and print PDF Guide on "How to Measure your Gate Width".
 


Measuring for Automated Gates:

For above ground automation, rear hung on the back of the posts take the smallest measurement and reduce by 50mm (this will give you the actual gate size to order).

For above ground automation, hung in the centre of the posts take the smallest measurement and reduce by 150mm (this will give you the actual gate size to order).

For below ground automation, rear hung on the back of the posts take the smallest measurement and plus 20mm (this will give you the actual gate size to order).

For below ground automation, rear hung in the centre of the posts take the smallest measurement and reduce by 240mm (this will give you the actual gate size to order).

Please note: Images are used to show the style of gate and have been computer generated. A Sample of wood used in construction is available on request. Width advertised is total width of gate. For example, if you select a width of 9ft, you will receive 2 leafs at 4ft 6". Height is taken to the highest point of gate. Rear view design can differ from image shown depending on the width of gate and/ or height.