Henley Sliding Cedar Gate from

£1,889.00
Choose your options
Need advice? Give us a call
0800 6124 965 / 0330 6600 107

Our "Prestige" sliding gate range. Combining the strength and durability of deep metal frames with the natural beauty of hand selected timber infill to create a truly elegant sliding gate, that really does "make an entrance".

Choose either Iroko (hardwood) - a naturally aesthetically pleasing wood, or Western Red Cedar (softwood) - known for its rich tones and stability (please call for samples). Expertly crafted by hand to any size in the UK. First by our skilled fabricators then to our experienced joiners for infill. Our metal framed gate range is what we are most proud of. Attention to detail both for look and durability is paramount. Sturdy 100mm x 50mm premium bottom rail, 50mm x 50mm framework, smooth welded joints and solid 30mm x 15mm rear bracing bars and stainless steel screws to fix the timber into place. To help prevent the gate from twisting or warping, welded braces are placed throughout the rear of the gate to ensure the cladding is correctly fixed. As timber is a natural product, it is prone to move during the seasons - in fact, a single piece of cladding can swell or contract up to 1.5mm, therefore, unlike others, we predict this movement and all gates are produced with a (non see through) expansion gap allowing the gate to "breathe" without anyone noticing it. The gap is dependant on gate size, and is usually between 5mm and 15mm which runs along the frame, parallel to the cladding width. This ensures stability of the gate without compromising the look.



 


Available Sizes:
  • Width: from 6ft to a massive 20ft
  • Height: from 4ft to 7ft - taken to the highest point of the gate.
  • Made to Measure - all gates online can be purchased to the nearest inch, if you do require a more precise size, please contact us. (Unlike others - there is NO additional cost for bespoke, we simply base price on the next size!).

Finish:
  • As standard, the framework will be finished in black (included in price) with optional finish to choose from for timber. We can also supply the frame in any RAL colour if needed.

Calculating Driveway Gate Size:
  • Take three measurements between existing posts/ pillars - top, middle and bottom (as below). 
How to measure driveway gates size
  • Take the largest of the three widths and order this size. We add the additional section of the gate on top of this to allow for the cantilever (usually 800mm).

For further information, please call our sales team direct on 0800 6124 965

 
Product Specifications:
TimberIroko (Hardwood) or Western Red Cedar
Metal Framed100mm x 50mm bottom rail - 50mm x 50mm Frame
CladdingT, G & V, 19mm Deep x 125mm Wide (nominal)
Rear Bracing30mm x 15mm Structural metal bars
ManufacturedHandcrafted in the UK
ConstructionTraditional, Time Served Techniques
SizesMade to Measure
EnvironmentAll Timber used is FSC Sourced or PEFC Certified
Gate installation and fitting service.

« Back