Cheltenham Low Driveway Gates:
Premium frame system. Using a deep 40mm x 40mm frame and thick 16mm infill bars. Manufactured by hand in the UK by skilled craftsmen using the finest materials to provide ultimate durability and quality. All of our gates come complete with a 10 year workmanship guarantee, adjustable hinges, latch, 2 x drop bolts. With this design, specifications of the frame will change according to width.
Height of Gate: Taken to the highest point of each gate. We recommend allowing a 50mm (2") clearance between the bottom edge of gate and driveway (as long as the drive is level). If you require a more exact height, please contact us to order.Gate Feature Options: Add style to your gate, select from feature Fleur De Lys, Ball or without.
How to Measure Gate Width:
Working out the required size is an important yet simple task to complete but we are always at hand to assist you through the process (0800 6124 965)
Calculating Driveway Gate width between existing Pillars or Posts:
Take three measurements, top, middle and bottom (as below).
Take the shortest of the three measurements and reduce by 150mm (or 6"). This allows for the hinge (inc pins) and centre opening gap. The final figure will be the actual width of gate required.
For example: Top: 3m 455mm | Middle: 3m 450mm | Bottom: 3m 445mm - shortest measurement would be 3m 445mm - reduce by 150mm = Actual Gate Width of: 3m 295mm
|Hanging Style||40mm x 40mm|
|Bottom Rail||40mm x 40mm|
|Top and Middle Rail||40mm x 10mm|
|Closing Rail||40mm x 10mm|
|Main Infill Bars||16mm (main) 12mm (bottom or dog bars)|
|Handcrafted in the UK||Bespoke, any width or height|
|Guarantee||10 year against gate welds|
|Opening||Electric or manual|