Newport Side Gate

Choose your options
Need advice? Give us a call
0800 6124 965 / 0330 6600 107
Stunning, hand-crafted Side Gates manufactured from the finest quality, slow grown European Redwood Pine. Combining traditional, time served construction techniques such as Mortise, Tenon & Dowel Joints alongside thick frame, deep cladding and rear structural bracing our Gates really are built for strength and durability.

Available Sizes:
  • Width: from 2ft to 4ft 6"
  • Height: from 5ft to 6ft 10"- (3ft to 4ft 6" classed as Garden Gates, height over 4ft 6" classed as Side Gates)
  • Made to Measure - all gates online can be purchased to the nearest inch, if you do require a more precise size, please contact us. (Unlike others - there is NO additional cost for bespoke, we simply base price on the next size!)
How to Calculate Gate Width:
    • Take 3 measurements between opening - Top, middle and bottom - use the smallest measurement.
    • If posts are already in place, reduce your measurement by 20mm (4/5") to allow for clearance.
    • Putting in posts, don't forget to also reduce this from your measurement.
    • When you have your measurement - select from drop down menu. If the size is not there, call or select next size down.
    How to measure wooden side gate width
     Download and print PDF guide on "How to Measure Side Gate"

    Choosing Your Posts:
    • 3" x 2" -Pine. Ideal if you want to bolt these into a wall/pillar as they match the gate beautifully. If you select a wax treatment the posts will be waxed to match.
    • 3"x 3" and 4" x 4" 8ft green softwood tanalised posts are designed to be concreted into the ground. The tanalised treatment ensures a 10 year ground contact protection. Good solid posts which can be painted.
    • 70mm x 70mm black metal posts are finished in black.
    Our Hinges:

    The tee hinges we offer are heavy duty hinges. Chosen as they hold our gates perfectly and with ease unlike cheaper versions which will require replacing alot sooner. Each tee hinge kit comes with the following
    • 2 x 18" Tee Hinges
    • 1 x Brenton Bolt
    • 1 x Ring latch and keep
    • Screws and fixings
    Gate Hinge Set

    Stain and Treatment:

    Each gate is stained by hand individually and 2 coats are applied. It is always advised to re-coat the gate after 28 days of it being fitted and the gate has climatised, then again at 6 months then annually thereafter. 

    Side Gate stain options

    Please note: Images are used to show the style of gate and have been computer generated. A Sample of wood used in construction is available on request. Width advertised is total width of gate.

    « Back
    Timber Slow grown, Redwood Pine
    Frame 3" x 3" (70mm x 70mm)
    Frame 3" x 3" (70mm x 70mm)
    Cladding T, G & V, 19mm deep x 125mm wide (nominal)
    Width from 2ft to 4ft 6"
    Height from 5ft to 6ft 10"
    Manufactured Handcrafted in the UK
    Construction Traditional, time served techniques