Sandbanks 3/4 Composite Driveway Gate

Eco friendly composite 3/4 split entrance gates, the Sandbanks. Constructed from 60% bamboo (FSC® 100% Certified) and 40% recycled High Density Polyethylene, environmentally gentle bonding agent, additives and tint. Saving these materials from landfill, giving them value and recycling them into a long life product, provides a harmonious solution to sustainable living all set within a deep metal frame using UK steel to produce an extremely durable and low maintenance gate.
£2,373.00
Choose your options
Need advice? Give us a call
0800 6124 965 / 0330 6600 107

Eco friendly composite 3/4 split entrance gates, the Sandbanks. Constructed from 60% bamboo (FSC® 100% Certified) and 40% recycled High Density Polyethylene, environmentally gentle bonding agent, additives and tint. Saving these materials from landfill, giving them value and recycling them into a long life product, provides a harmonious solution to sustainable living all set within a deep metal frame using UK steel to produce an extremely durable and low maintenance gate. If you would like to order a free sample set of our composite cladding, please see here.

Not only are composite driveway gates better for the environment, you'll never have to worry about staining or treating it ever again...just simply hose the gate down!

Included with the Gate:

  • Longlife powder coated frame (in black - optional extra to colour match with the cladding)
  • Locinox lock and handle, drop bolts, wall pins and hinges

Benefits of Composite Gates:


Composite gates benefits

Composite Cladding Options:

Four options available as standard. Stone grey, Oak, Granite and Walnut. 

Composite cladding options for gates
Frame Colour Choice: (optional extra - black frame as standard)

Composite gate frame colour RAL
*Please note: Frames will not be an exact match to cladding. Please expect several shades different between cladding colour and frame. 


Available Sizes:
  • Width: from 6ft (each side 3ft) to a massive 20ft (each side 10ft)
  • Height: from 4ft to 6ft 6"- taken to the highest point of the gate.
  • Made to Measure - all gates online can be purchased to the nearest inch, if you do require a more precise size, please contact us. (Unlike others - there is NO additional cost for bespoke, we simply base price on the next size!).


Posts:
  • Due to the weight of these gates. We only recommend "below ground" posts for support or install to existing pillars (as long as the pillar is structurally sound).
 

Calculating Driveway Gate Size:
  • Take three measurements between existing posts/ pillars - top, middle and bottom (as below).
  • Take the smallest of the three widths and reduce as follows: (depending on gate set up)
Option 1: Gate hanging on the rear of posts/ pillars. Main advantage of this set up is the reduced gap that is visible between the gate edge and post. 

Driveway Gates set up example.
To calculate gate width: Take the lowest measurement and reduce by 50mm (2").

Option 2: Gate mounted between existing posts/ pillars.
Hanging a gate between existing posts/ pillarsTo calculate gate width: Take the lowest measurement and reduce by 150mm (6").
For further information, please call our sales team direct on 0800 6124 965


« Back