Sheringham Wrought Iron Driveway/ Entrance Gates:
Manufactured by hand in the UK by skilled craftsmen using the finest materials to provide ultimate durability and quality. All of our gates come complete with a 10 year workmanship guarantee, adjustable hinges, latch, 2 x drop bolts. With this design, specifications of the frame will change according to width. For widths under 10ft, 25mm x 10mm frame will be used. For gates of 10ft and over, we use a 25mm x 25mm frame.
Height of Gate: Taken to the highest point of each gate. We recommend allowing a 50mm (2") clearance between the bottom edge of gate and driveway (as long as the drive is level). If you require a more exact height, please contact us to order.Gate Furniture Included (hinges etc): 4 x adjustable hinges, hinge pins, latch and drop bolts included with each gate. As standard, the position of the hinge will be 6" (150mm) from the bottom edge of gate and 6" (150mm) from top edge of gate. If you require these to be different (if for example you already have pins set into a post/ pillar), please call us.
Why choose us
Hand crafted gates individually made here in the UK
Can be made to ANY width and height
We construct gates to a very high standard, using the correct size metal for each gate depending on the style and size. This gives you a very strong gate which will last for many years
Adjustable hinges, 2 x drop bolts and ring latch are included with your gate
10 Year workmanship guarantee against welds
One of UK's largest gate manufacturers approved by Trading Standards
Delivered straight to your door
Working out the required size is an important yet simple task to complete but we are always at hand to assist you through the process (0800 6124 965)
Calculating Driveway Gate width between existing Pillars or Posts:
Take three measurements, top, middle and bottom (as below).
Take the shortest of the three measurements and reduce by 150mm (or 6"). This allows for the hinge (inc pins) and centre opening gap. The final figure will be the actual width of gate required.
For example: Top: 3m 455mm | Middle: 3m 450mm | Bottom: 3m 445mm - shortest measurement would be 3m 445mm - reduce by 150mm = Actual Gate Width of: 3m 295mm
|Gate width under 10ft||Gate width 10ft and over|
|Hanging Style||25mm x 10mm||25mm x 25mm|
|Bottom Rail||25mm x 10mm||25mm x 25mm|
|Top, Middle and Closing Rail||25mm x 10mm||25mm x 25mm|
|Main Infill Bars||12mm Diameter||12mm Diameter|
|Scrolls||12mm x 3mm||12mm x 3mm|
|Hanging Style||40mm x 40mm|
|Bottom Rail||40mm x 40mm|
|Top and Middle Rail||40mm x 10mm|
|Closing Rail||40mm x 10mm|
|Main Infill Bars||16mm (main) 12mm (bottom or dog bars)|
|Handcrafted in the UK||Bespoke, any width or height|
|Guarantee||10 year against gate welds|
|Opening||Electric or manual|